I-Track- Základní desky, SKRYTÉ NÁDRAŽÍ

IN STOCK

The pull-out holder is designed for I-Track System motherboards. The holder is supplied as a kit in three variants: for tablets, for switches and buttons, for switches, buttons and Roco / Fleischmann turntable controller. Assemble the entire pull-out holder, glue the side panels and then insert it into the grooves in the motherboard (100x80, 10x90, 120x80, 120x90, 120x100). Snap on the rear clutch and attach the front panel. You can place a tablet (max. 12 ”) on it to control the track. On another holder you can place a panel for the necessary controls - buttons, switches, etc. The entire holder is inserted in the motherboard. To operate, simply pull it out and you can ride. When finished, slide it back into the board so that it does not "interfere" and dust on it. The front plate can be easily removed so that everything you need can be installed. Then you simply place it on the pull-out holder. If you need special holes, they can be made in the panel under the tablet.

11,42€

DETAIL

Pull-out control holder-buttons,switches,turntable

IN STOCK

The pull-out holder is designed for I-Track System motherboards. The holder is supplied as a kit in three variants: for tablets, for switches and buttons, for switches, buttons and Roco / Fleischmann turntable controller. Assemble the entire pull-out holder, glue the side panels and then insert it into the grooves in the motherboard (100x80, 10x90, 120x80, 120x90, 120x100). Snap on the rear clutch and attach the front panel. You can place a tablet (max. 12 ”) on it to control the track. On another holder you can place a panel for the necessary controls - buttons, switches, etc. The entire holder is inserted in the motherboard. To operate, simply pull it out and you can ride. When finished, slide it back into the board so that it does not "interfere" and dust on it. The front plate can be easily removed so that everything you need can be installed. Then you simply place it on the pull-out holder. If you need special holes, they can be made in the panel under the tablet.

11,42€

DETAIL

Pull-out control holder-buttons,switches

IN STOCK

The pull-out holder is designed for I-Track System motherboards. The holder is supplied as a kit in three variants: for tablets, for switches and buttons, for switches, buttons and Roco / Fleischmann turntable controller. Assemble the entire pull-out holder, glue the side panels and then insert it into the grooves in the motherboard (100x80, 10x90, 120x80, 120x90, 120x100). Snap on the rear clutch and attach the front panel. You can place a tablet (max. 12 ”) on it to control the track. On another holder you can place a panel for the necessary controls - buttons, switches, etc. The entire holder is inserted in the motherboard. To operate, simply pull it out and you can ride. When finished, slide it back into the board so that it does not "interfere" and dust on it. The front plate can be easily removed so that everything you need can be installed. Then you simply place it on the pull-out holder. If you need special holes, they can be made in the panel under the tablet.

11,42€

DETAIL

Fixed control holder I-Track

IN STOCK

Fixed control holder I-Track is an innovative device designed for model railroaders using the Hacker Model I-Track system to control their model railroads. This holder is crafted to provide a comfortable and stable placement of tablets or smartphones above the railroad tracks, enabling modelers with a simple and efficient way to control and monitor their railway layouts. Supplied in three variants. 1 - for tablets (size max. 12 ”). 2 - for switches and buttons. 3 - for switches, pushbuttons and Roco / Fleischmann turntable controls. If you need a different arrangement of controls, use a tablet board and make holes according to your needs. The holders are delivered disassembled and can be glued with wood glue or with cyanoacrylate CA-HACKER glue

11,25€

DETAIL

Fixed control holder-buttons,switches,turntable

IN STOCK

Fixed control holder I-Track is an innovative device designed for model railroaders using the Hacker Model I-Track system to control their model railroads. This holder is crafted to provide a comfortable and stable placement of tablets or smartphones above the railroad tracks, enabling modelers with a simple and efficient way to control and monitor their railway layouts. Supplied in three variants. 1 - for tablets (size max. 12 ”). 2 - for switches and buttons. 3 - for switches, pushbuttons and Roco / Fleischmann turntable controls. If you need a different arrangement of controls, use a tablet board and make holes according to your needs. The holders are delivered disassembled and can be glued with wood glue or with cyanoacrylate CA-HACKER glue

11,38€

DETAIL

Fixed control holder-buttons,switches

IN STOCK

Fixed control holder I-Track is an innovative device designed for model railroaders using the Hacker Model I-Track system to control their model railroads. This holder is crafted to provide a comfortable and stable placement of tablets or smartphones above the railroad tracks, enabling modelers with a simple and efficient way to control and monitor their railway layouts. Supplied in three variants. 1 - for tablets (size max. 12 ”). 2 - for switches and buttons. 3 - for switches, pushbuttons and Roco / Fleischmann turntable controls. If you need a different arrangement of controls, use a tablet board and make holes according to your needs. The holders are delivered disassembled and can be glued with wood glue or with cyanoacrylate CA-HACKER glue

11,38€

DETAIL

Base board for model railroad 120x90x16 cm

IN STOCK

Base board for model railroad. The board has a special construction that guarantees rigidity and very low weight. The reinforcing bars have openings at the top that can be used for cable installation. Holes in the bottom plate provide access to all locations.

146,83€

DETAIL

New

Base plate 120x90x16 cm ASSEMBLED

IN STOCK

Base board for model railroad ASSEMBLED. The board has a special construction that guarantees rigidity and very low weight. The reinforcing bars have openings at the top that can be used for cable installation. Holes in the bottom plate provide access to all locations.

176,21€

DETAIL

Base board for model railroad 120x40x16 cm

IN STOCK

Base board for model railroad. The board has a special construction that guarantees rigidity and very low weight. The reinforcing bars have openings at the top that can be used for cable installation. Holes in the bottom plate provide access to all locations.

76,21€

DETAIL

Base board 120x40x16 cm ASSEMBLED

IN STOCK

Base board for model railroad ASSEMBLED. The board has a special construction that guarantees rigidity and very low weight. The reinforcing bars have openings at the top that can be used for cable installation. Holes in the bottom plate provide access to all locations.

109,54€

DETAIL

Base board for model railroad 100x90x16 cm

IN STOCK

Base board for model railroad. The board has a special construction that guarantees rigidity and very low weight. The reinforcing bars have openings at the top that can be used for cable installation. Holes in the bottom plate provide access to all locations.

126,83€

DETAIL

Base board 100x90x16 cm ASSEMBLED

IN STOCK

Base board for model railroad ASSEMBLED. The board has a special construction that guarantees rigidity and very low weight. The reinforcing bars have openings at the top that can be used for cable installation. Holes in the bottom plate provide access to all locations.

168,17€

DETAIL

I-Track-Baseboards, HIDDEN STATION